The NJL-308 dynamic torque sensor is suitable for measuring micro range (below 2Nm) torque. When the torque measurement value is less than 2Nm, the friction torque of the rotating body support bearing becomes an undeniable interference factor. By separating the strain zone from the power and transmission zones, the strain zone avoids the influence of bearings, effectively improving and enhancing the overload resistance and measurement accuracy of torque sensors.
| range | 0~±0.05Nm~±2Nm |
| Supply Voltage | ±15VDC、24VDC |
| Torque signal | 5~15kHz、4~20mA、1～5V、0-10V(可选) |
| Speed range | 0~1000、3000、6000、8000 RPM |
| Speed signal | 60Pulse / turn 、4~20mA、1~5V |
| accuracy | ±0.25%FS、0.5%FS |
| Year stability | 0.3%FS/year |
| insulation resistance | ≥200MΩ（100VDC） |
| ambient temperature | -20~60℃ |
| relative humidity | 0~90%RH |
| overload capacity | 120% |
1. LONGLV provides customers with installation and debugging services, as well as other technical consultations. If necessary, technical personnel can provide on-site technical training. If the customer has any technical questions, the technical personnel will provide a response within 4 hours.
2. LONGLV products are strictly designed and produced in accordance with the ISO9001 international quality system, with a 1-year warranty for sensor products and a 3-year warranty for instrument products, with a 7-day return and exchange policy and lifelong maintenance.
(Human damage is not covered by the warranty, and customized products without quality issues are not returned or replaced.)
3. For returns and exchanges caused by quality issues, Longlv will bear the return and exchange shipping costs. The cost of returns andexchanges for non quality issues will be borne by the customer.
Note: Quality issues refer to customized parameters such as function, size, specifications, and installation method that are not customized according to customer requirements, do not meet functional requirements, have dimensional errors, and have inaccurate accuracy (excluding within the error range).
Customized products require confirmation of drawings by both parties before processing and production. If the product does not meet customer requirements, a written objection must be raised within two weeks. If the customer does not raise an objection within the specified time limit, it will be deemed as qualified acceptance.
If an objection is raised within the deadline and it is confirmed by both parties that it is a product quality issue or production has not been carried out according to the requirements confirmed by both parties, it can be exchanged or refunded. If there are no quality issues and the shipping model andthe contract signed model are complete and correct, no return or exchange service will be provided.
4. The products returned for repair will have a test result issued within 3 working days and the repair will be completed within 7 working days.
After sales consultation
Technical consultation, factory repair, invoices, complaint suggestions, and other related issues. After sales service hotline 021-51601181
Mobile
E-mail
SKYPE
TOP
Room 910, Building 1, Zikun Science and Technology Park, No. 5018Hutai Road, Gucun Town, Baoshan District, Shanghai
GET IN TOUCH：+86-189-1625-1113
E-mail：shlonglv@163.com
Home
Producdts
Pressure SensorPressure Gauge Load CellTorque SensorTemperature SensorIntelligent ControllerIndustry Application
Aerospace/navigation/military industryEngineering/Textile MachineryRailHVACAutomotive/steel industryEnergy Industry/PetrochemicalsMedical equipmentAbout LONGLV
About UsNews Center
LONGLV NewsTechnical AnsweringIndustry informationService and Support
Payment MethodTechnical SupportProduct SupportContact Us
Contact Us
